"mmy" Vs. "PPU" Prvi brass, Differences? |
Post Reply |
Author | |
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
Posted: May 16 2011 at 1:15am |
This comes up because I just tried reloading some of the older(?) "mmy" head-stamped Prvi Partizan brass, (the stuff with the green primer sealant). Usually I reload the newer(?) blue & white box stuff without sealed primers so this lot is new to my reloading experience.
The new stuff runs like a top with zero problems, but I'm having some issues with the older stuff seating primers fully! I tried both cleaning & reaming the pockets but they seem shallower by a slight amount & tighter as well, this doesn't let primers seat below flush like the newer stuff does. The primers also seem tougher to seat, even after uniforming the pockets. Has anyone else had problems like this with the older stuff? Is this even older? Or am I just seeing some kind of mil-spec run of ammo I haven't encountered before. If it helps clarify any this was with both the 180(?) Gr SP & the 150(?) Gr loads from the factory & both are not FMJ, but hunting soft-point rounds. I don't think its either the primers, nor do I think it is me as some HXP I reloaded at the same time was just fine. |
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Bear43
Special Member Donating Member Joined: August 11 2010 Location: Doland, SD Status: Offline Points: 3059 |
Post Options
Thanks(0)
|
I don't reload, so I don't have firsthand experience, but I have read many times about people saying the same thing about older "nny" brass. I wonder if that older Yugo .303 brass is just a bit shorter on the rim. Have you ever measured and compared the rim thickness vs. the newer? Just spinning my gears a bit
|
|
SW28fan
Special Member Donating Member Joined: July 02 2007 Location: Texas Status: Offline Points: 2951 |
Post Options
Thanks(0)
|
I have reloaded both headstamps and haven't experienced any differance. The "MMY" is Cyrillic for PPU and while we are at it HXP is "Eta Chi Rho" I had to take Greek in school so I might as well make some use of it.
|
|
Have a Nice Day
If already having a nice day please disregard |
|
Bear43
Special Member Donating Member Joined: August 11 2010 Location: Doland, SD Status: Offline Points: 3059 |
Post Options
Thanks(0)
|
I have to wonder as well if there are certain years of brass that are the issue? You know, like certain years of the Yugo 8mm were not so good and others really amazing. That I do have intimate first hand experience with.
|
|
Aifwikir
Senior Member Joined: July 04 2010 Location: Magazine AR Status: Offline Points: 238 |
Post Options
Thanks(0)
|
Ah Gees , Shamu! Don't you know nothin' ? You must have gotten the MMY wet at one point and now it's shrunk a little! Dang,, I gotta tell ya everything.
Aif PS: No idea on the brass buddy. Set it aside and let me think on it for a while.
|
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
Well I did get it at the pool , so there's a change both it & I got wet. Not sure about the "shrinkage" though.
|
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |