DCRA wears a Matchmaker

As might be expected, my initial sighter shots were high at 200 yds since the point of aim is now “center mass” rather than a 6:00 hold on the black aiming mark.  I had a + .015 front sight blade previously, so the globe front sight is a bit taller, by about 1 size.  

I expect as I get used to the different sight picture, scores will improve.  

Here is the first group at 200 yds.   I did not initially boresight the rifle, since the change in front sight height from the standard blade sight was fairly small.  

First two sighters in the 7 ring at 12:30 right next to each other using my previous 200 yd zero rear sight setting.

I lowered the rear sight a bit too much for shot #3, which was just outside the 10 ring at 5:00 (I keep forgetting that the PH 5c sight adjustments are about 1.25 MOA per 4 clicks and not a true MOA). 

Then adjusted up 1 MOA and Left 1 MOA.  The next 6 shots held a good group, under 1.5 MOA, but a bit high and left of center. 

Now to find the time to head back to the 1000 yd range at Spencer, TN…