Enfield-Rifles.com Homepage
Forum Home Forum Home > Enfields > After Market Enfields
  New Posts New Posts RSS Feed - Eddystone version of Enfield
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Eddystone version of Enfield

 Post Reply Post Reply Page  12>
Author
Message
skipph View Drop Down
Newbie
Newbie


Joined: December 10 2008
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote skipph Quote  Post ReplyReply Direct Link To This Post Topic: Eddystone version of Enfield
    Posted: December 10 2008 at 3:36pm
I own an 1917 Eddystone  P-17 mfg of the Enfield rifle in 3006. Smile The rifle has been sporterized, rabbit ears machined off and scope mounts set up. Smile It has a 26" parkerized bbl. Approve I love this rifle but it weighs over 10 lbs all set up and loaded. Unhappy A bit heavy for hiking the hills in search of that trophy Mulie.
 
This thing shoots absolutely awsome Thumbs%20Up and is capable of shooting sub moa by someont who can shoot better than me.  I consistantly shoot 1" - 1 1/2"  5 shot groups with 165 - 190 gr handloads.  BBL has been machined for proper headspace.
 
I would like to complete the sporterizing of this rifle.  Would like to obtain a sporter stock for it in a Ramline type or other reasonably priced light weight synthetic stock .
 
It currently has a dense walnut sportstock but has been bastardized, beat up, dinged and its not in the greatest of appearance.  Plus the stock adds to its overall weight.  Plus I want to adapt it to accept detachable magazines if they are available instead of emptying via the floorplate.

Can anyone on this forum refer me to a supplier for a synthetic sporter stock?

Would appreciate the help.
Thanks,
Skip
Back to Top
Guests View Drop Down
Guest Group
Guest Group
Post Options Post Options   Thanks (0) Thanks(0)   Quote Guests Quote  Post ReplyReply Direct Link To This Post Posted: December 10 2008 at 5:18pm
G'Day  Skipph welcome aboard !

     There used to be a company by the Name of Bell & Carson that did a Synthetic Stock for both the Pat 14 & M17. I've seen a couple over the years.
 As for a detachable Clip ? Your out of luck unless you had the Rifle modified to accept a Detachable Clip & I reckon that would cost the earth


        Dave 
Back to Top
skipph View Drop Down
Newbie
Newbie


Joined: December 10 2008
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote skipph Quote  Post ReplyReply Direct Link To This Post Posted: December 11 2008 at 1:11pm
Thanks Dave I appreciate you giving me that lead. Smile Bell and Carlson seems to have the best deal on a synthetic at $150.  Big%20smile  The rabbit ears having been machine off was left flat across the rear of the receiver.  I think I will have it re-machined to take the sides down at 45 * so it will appear better.  I am sure that will not weaken the receiver.  I am only in this tanker $100.   But I think I can make something out of it.  I already know it is a SHOOTER!

Thank you, thank you , thank you
Skip
Back to Top
Guests View Drop Down
Guest Group
Guest Group
Post Options Post Options   Thanks (0) Thanks(0)   Quote Guests Quote  Post ReplyReply Direct Link To This Post Posted: December 11 2008 at 1:50pm
No Worries Skip! I'm just Glad they still are around . There is one thing with the rifle being a Eddystone ,I know with the Pat14  they were noted for having weakened or even cracked receivers in some of the Production run but I have no idea whether this was ever the case in the M1917's I'd look into it before taking any meat off the receiver. I've heard of late of taking rifles to Metal workshops that do X-raying on welds & having the rifle or parts there of checked ! Where I work these days I take my Rifle Brass every now again & one of the Blokes there x-rays it for me to check the condition of the cases around the Base /Rim to check for impending Head /case separation. It's quite a novelty for me !


      Dave     
Back to Top
Tony View Drop Down
Moderator Group
Moderator Group
Avatar
Moderator

Joined: April 18 2006
Location: United Kingdom
Status: Offline
Points: 3256
Post Options Post Options   Thanks (0) Thanks(0)   Quote Tony Quote  Post ReplyReply Direct Link To This Post Posted: December 11 2008 at 9:41pm
Surely you don't need to xray them Dave??? You're the radioactive source in town. Just use some film hold the case and expose it !! 
Rottie (PitBulls dad.)


“If electricity comes from electrons, does morality come from morons

Born free taxed to death!!!

Back to Top
oldbikewrench View Drop Down
Senior Member
Senior Member


Joined: November 04 2006
Location: United States
Status: Offline
Points: 705
Post Options Post Options   Thanks (0) Thanks(0)   Quote oldbikewrench Quote  Post ReplyReply Direct Link To This Post Posted: December 12 2008 at 4:00am
Not exactly the type of stock your looking for but try, rifle-stocks.com. This is Richards  Microfit Gunstocks. And they make wonderful stocks. Check them out.
And welcome to the site!
Love your neighbor as yourself.'...Mark12:31
He said to them, "But now if you have a purse, take it, and also a bag; and if you don't have a sword, sell your cloak and buy one. Luke22:36
Back to Top
skipph View Drop Down
Newbie
Newbie


Joined: December 10 2008
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote skipph Quote  Post ReplyReply Direct Link To This Post Posted: December 12 2008 at 4:18am
Dave,

I had the barrel machined for proper head space about about 25 yrs ago and don't think I have put a thousand rounds thru it since.  Also had the receiver magnafluxed at the time... no flaws!  The only problems I have had is a couple head separations with Federal brass which I no longer use.  Federal seems to be softer than the Remeington brass I use. 

I use Remington brass almost exclusively because I perceive it to be the best all round quality and get the best longevity with it. 
Also I have found that repeated full length sizing will shorten the life/number reloads a case will take regardless of brand. 

Neck sizing is better, IF YOU ONLY USE THEM IN THE SAME RIFLE !!  DIFFERENT RIFLE CHAMBERS HAVE SLIGHT VARIATIONS IN THEM, WHICH DEMANDS THE NEED FOR FULL LENGTH SIZING IF USING DIFFERENT RIFLES

Although it is necessary to anneal the NECK FROM THE SHOULDER UP after about 3 loads.  This keeps the neck from splitting from repeated loads.  I do that by emersing primer decapped cases before resizing in water sanding upright to the beginning of the shoulder.  Leaving the shoulder/neck above the water.  Then use a welding torch (propane is not hot enough) with a proper blue flame heat each case till the neck starts to glow red. 

When you get that then let the case cool while standing.  Tipping them over will make them harder and more likely to crack and split.  Use a metal pan about the same depth as the case is long.  Then I polish them before resizing them.  THEN I necksize and trim them to proper length.  Neck sizing is done with the full length die as regularly done accept you don't fully insert the case into the resize die.   Takes a little practice but anyone experienced in reloading can make the proper adjustment.

If you find that you have to full length size them each time, then you will have trouble with longevity and possible case failure after several reloads.  Neck sizing gives me about 10 to twelve reloads if I do that from the first time the case is shot 

Called Bell and Carlson today and they do have a drop in stock that may only need some small amount of inletting to fit the barreled action for it to free float.  That stock weighs in at 2.25 lbs is about 1.5  lbs lighter than my old Bishop dense walnut stock. 

So after the holidays I will definitely order that.  There are no other suppliers that I have found that have an offering for the P17 in a synthetic stock.  Will also refinish the receiver and bolt in a matte finish and reblue it.  When done it should look really good!

Skip 
Back to Top
skipph View Drop Down
Newbie
Newbie


Joined: December 10 2008
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote skipph Quote  Post ReplyReply Direct Link To This Post Posted: December 12 2008 at 4:25am
Oldie,

Does not seem they offer a synthetic stock.  But thank you for the referral.
Skip
Back to Top
skipph View Drop Down
Newbie
Newbie


Joined: December 10 2008
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote skipph Quote  Post ReplyReply Direct Link To This Post Posted: December 12 2008 at 4:31am
Dave,

I found a website for Eddystone rifles that shows the common markings on the rifles.  The ser # shows production in Nov 1918.  Had a few of the production markings but most were on the bbl side of the action.  Marks on action may have been machined off when rabbit ears were taken off.  Bolt aqlso had a mark on it so it seems to be all the right parts.

Skip
Back to Top
oldbikewrench View Drop Down
Senior Member
Senior Member


Joined: November 04 2006
Location: United States
Status: Offline
Points: 705
Post Options Post Options   Thanks (0) Thanks(0)   Quote oldbikewrench Quote  Post ReplyReply Direct Link To This Post Posted: December 12 2008 at 1:09pm
Those U.S. M1917 (P17 Enfields) are truly great guns. I have owned a few. As a matter of fact I just sold a sporterized Eddystone chambered in 30-06AI. It shot pretty good. I still have a sporterized Remington M1917. It still is 30-06 but that will have changed by this time next year.
Love your neighbor as yourself.'...Mark12:31
He said to them, "But now if you have a purse, take it, and also a bag; and if you don't have a sword, sell your cloak and buy one. Luke22:36
Back to Top
Guests View Drop Down
Guest Group
Guest Group
Post Options Post Options   Thanks (0) Thanks(0)   Quote Guests Quote  Post ReplyReply Direct Link To This Post Posted: December 12 2008 at 4:01pm
Originally posted by Tony Tony wrote:

Surely you don't need to xray them Dave??? You're the radioactive source in town. Just use some film hold the case and expose it !! 


 Hey I'll have you know that Olympic Dam is a Copper Mine & the Gold ,Silver & Uranium that is pulled out of the ground is a by product ! There is no harm full Radiation emitted! We know this for a fact ! This is why we have to shower & change out of Overalls before leaving the mine area ,Stop any form of equipment coming off site unless it's been cleared by the Radiation Testing section & we are having a giant testing pad fitted to monitor vehicles leaving the Lease!!!!!! Nope no risk of Radiation there ! Wink

       Skip it's good to see somebody else who still anneals their cases,over here it seems to be a dieing art !!!! I used the Pan & water method myself ,Old cases like the 303-25 only last about 4 reloads without splitting if you don't anneal them after forming. I have brass in different Cals that I have had for so long I know each one by name & can identify them in the ark on a moonless night by touch alone !Big%20smile When I was still shooting for a living if I lost one case in the night I wouldn't sleep for several days pineing for it! Cry


       Dave  
Back to Top
SW28fan View Drop Down
Special Member
Special Member
Avatar
Donating Member

Joined: July 02 2007
Location: Texas
Status: Offline
Points: 2951
Post Options Post Options   Thanks (0) Thanks(0)   Quote SW28fan Quote  Post ReplyReply Direct Link To This Post Posted: December 23 2008 at 4:28am
The problem with Eddystones is that the  barrels were torqued on very tight in the order of 300 pounds.  The problem comes when you try to rebarrel them. You have to make a relief cut on the barrel where it meets the reciever to relieve pressure. Many gunsmiths did not know this and tried using a bigger wrench and ended up cracking the receiver. It mostly happened to Eddystone M1917s but it can happen to any flavor of
 P-14/M1917.
Have a Nice Day
If already having a nice day please disregard
Back to Top
A square 10 View Drop Down
Special Member
Special Member
Avatar
Donating Member

Joined: December 12 2006
Location: MN , USA
Status: Offline
Points: 14452
Post Options Post Options   Thanks (0) Thanks(0)   Quote A square 10 Quote  Post ReplyReply Direct Link To This Post Posted: December 23 2008 at 8:37am
heres the link -
 
Back to Top
skipph View Drop Down
Newbie
Newbie


Joined: December 10 2008
Status: Offline
Points: 18
Post Options Post Options   Thanks (0) Thanks(0)   Quote skipph Quote  Post ReplyReply Direct Link To This Post Posted: January 23 2009 at 9:52pm
To all,
Well I got the Bell and Carlson stock today.  I need to do a bit of adjustment with a dremel to make fit properly.  What a nice stock, I am ecstatic.   I dropped the action an barrel in and it fit pretty good but the floor plate needs somr fitting.  Man this took about 2 to 2.5 lbs off the thing.  I was amazed at the balance it had.  Really happy with it.  When I finish in a few weeks I will post a pict.
Thanks to all for your input and opinions.  Well appreciated. 
Skip
Back to Top
charly45 View Drop Down
Groupie
Groupie
Avatar

Joined: April 08 2008
Location: West Virgina
Status: Offline
Points: 96
Post Options Post Options   Thanks (0) Thanks(0)   Quote charly45 Quote  Post ReplyReply Direct Link To This Post Posted: July 20 2009 at 12:07pm
These ARE great guns
Im here to kick a$$ and chew bubble gum,   and im alll out of bubble gum!!
Back to Top
charly45 View Drop Down
Groupie
Groupie
Avatar

Joined: April 08 2008
Location: West Virgina
Status: Offline
Points: 96
Post Options Post Options   Thanks (0) Thanks(0)   Quote charly45 Quote  Post ReplyReply Direct Link To This Post Posted: July 20 2009 at 12:10pm
Heres another they both shoot great
Im here to kick a$$ and chew bubble gum,   and im alll out of bubble gum!!
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.