Guess what I just bought? |
Post Reply | Page <12 |
Author | |
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
I think that's exactly what I have. Closer examination has revealed it needs more fitting than I thought so it may be just a display piece. The bolt head needs a lot of work, (the locking lip re cutting, the bolt face grinding back & the extractor & short front of the striker regrinding for protrusion, & so on) & the barrel tube is too long to ever fit. It will need re-cutting & re threading at a minimum. |
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
The Armourer
Senior Member Joined: June 23 2019 Location: Y Felinhelli Status: Offline Points: 1246 |
Post Options
Thanks(0)
|
In another post, you seemed to think that it had been used and was previously fitted to a rifle. UPDATE: Well, the bolt, head, barrel & hex nut arrived in the little wooden tray. It has definitely been fitted to a rifle at some time there are the remains of Sharpie on the rear face of the bolt's locking shoulders, bolt face & in a couple of other places. The firing pin is the 2-part type & the bolt body & rib has some minor pitting. Nothing to worry about. The cocking piece has a “Broad Arrow” lightly elector-penciled onto it & the number “262”. The bolt head may have been re-drilled but it it was it was very neatly done because I cant see signs of it. Bolt handle has a serial number on the rear face “82657” & the assembly number “L 4212” on the bottom. The barrel unit is a dummy chamber with a rifled tube, the rifling is in very nice condition, but it has definitely been fired as there is residue in the bore, chamber & groove for the rim. It seems completely unmarked except for a tiny & very lightly struck “18” just at the junction of chamber & barrel proper. It has a hex nut for securing it at the muzzle end. Head-spacing looks much simpler than I thought. The “breech” is recessed for the rim, as long as the bolt closes fully when fitted we should be good to go. One odd thing, which may just be a feature of the .22 bolt assy is that when in the “closed & locked” position the striker & cocking piece are about 1 ¼ turn backed off from fully forward! I don't know if this is just replacing the stop collar, which the striker doesn't seem to have per se in it 2 piece RF configuration. Firing pin protrusion looks normal & the front section is free floating with no binding or snagging. Can anyone confirm this either way? I have NOT tried fitting to my rifle at this point as everything has been given a good clean & is soaking up a little oil overnight. I'll get a bunch of pictures tomorrow as well. |
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
I believe it was, but not to my rifle. It may now become a display piece due to the amount of work involved.
|
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
The Armourer
Senior Member Joined: June 23 2019 Location: Y Felinhelli Status: Offline Points: 1246 |
Post Options
Thanks(0)
|
Ahhhh - the peculiarity of the English language. "it may just be a display piece" (ie a non-functioning item) or "it may now become a display piece" (too much work to get it to function in my rifle)
|
|
A square 10
Special Member Donating Member Joined: December 12 2006 Location: MN , USA Status: Offline Points: 14452 |
Post Options
Thanks(0)
|
funny how we over state while trying to be direct in this language - yet , i get the thinking , i once had a conversion custom turned to fit my springfield M1903 - i had it intentionally made to require fitting to the receiver it was designed for , took to turns with a chamber reeme to fit it , but it was designed that way ,
i know that springfields were designed with interchangeability but this was intended as a custom fit - one of a kind item - probably due to my love of enfields ,
|
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
My usual reply to grammar nazis its simply "There, Their, They're"!
|
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
Anyway, pictures as promised. Kit, as received. close up of bolt & .22 RF bolt head bolt & head bottom view. You can see the amount the cocking piece is pushed rearwards by the RF conversion. Bolt & head top view Bolt head & offset short RF firing pin. |
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
Offset firing pin in bolt face 22 tube, breech end, shows extractor cut. 22 tube muzzle end. Tube protrusion from barrel's muzzle. You can see the 1/8" or so of un-threaded tube. nut fully tightened showing gap with original muzzle. |
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
This is as far as the bolt & head can be closed on the action. The bolt alone closes fully & smoothly with the head removed. What I'm referring to as "the curve" of the SMLE receivers bolt head rail. The red line is strait. I never noticed this before. The original bolt works fine so I assume I just need to relieve the inside of the bolt head's "hook" to get clearance. |
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Zed
Special Member Donating Member Joined: May 01 2012 Location: France Status: Offline Points: 5585 |
Post Options
Thanks(0)
|
You could turn up a spacer to just sit on the barrel muzzle (not the nose cap) to be able to tighten the nut.
|
|
It's nice to be important, but it's more important to be nice!
|
|
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
Thats what I was thinking. Maybe something a bit more modern than leather though. Delrin maybe?
|
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |