Question on No.1 MkIII FTR |
Post Reply | Page <1 234 |
Author | |
Shamu
Admin Group Logo Designer / Donating Member Joined: April 25 2007 Location: MD, USA. Status: Offline Points: 17603 |
Post Options
Thanks(0)
|
The back should be open, that's perfectly normal. The little protrusion to the rear is normal too. Is there plenty of tension on the extractor claw? if you look at the front face is the tip of the spring SLIGHTLY behind the edge of the claw & in full contact with it forcing it to the center? If when you cycle it slowly with a fired cartridge or case does it "withdraw" on the last mm or so of forward travel, then reinsert, grasping the case rim at the very beginning or bolt opening? |
|
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)
|
|
TheFlynn01
Groupie Joined: May 11 2022 Location: USA Status: Offline Points: 61 |
Post Options
Thanks(0)
|
Yeah the bolt extracts fine and the claw has good tension. It is placed just behind as well. It also grabs very nicely.
The only thing I was was worried about was this: I have seen some pictures of bolts from behind, and there seems to be a bit of metal under the spring. Almost like a little keeper for the folded part of the spring. Mine does not seem to have it, so I thought it might be broken haha
|
|
Post Reply | Page <1 234 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |