![]() |
My version of the 7.62 Enfield Sniper Rifle |
Post Reply ![]() |
Author | |
Goosic ![]() Senior Member ![]() ![]() Joined: September 12 2017 Location: Phoenix Arizona Status: Offline Points: 6694 |
![]() ![]() ![]() ![]() ![]() Posted: March 28 2021 at 7:49pm |
Everything that could be done to bring out the best of this rifle was done to the best of my abilities. Everywhere a milled steel item could have been used, was replaced with the stamped version. The scope assembly was modified to accommodate a 4-12×40 rifle scope with side focus from 10 yards out to infinity. With a full magazine and plastic oiler,"filled" along with the pull through, the rifle balances directly on the King Screw. With all the lightened metal bits, including a sear from a No5 and the stock bolt that has been reduced in diameter, the rifle weighs in at a scant 10.5 lbs fully loaded minus a sling. The cocking piece, trigger and sear contact points has been polished with diamond impregnated jewelers rouge that allow for one smooth pull until let off is reached with a consistent 2.5 lb of trigger pull. Barrel bedding was done at the muzzle using a copper shim. According to CMP/NRA specifications, it is neither a service rife nor a target rifle. I will refer to it as a Rogue Rifle and in a class all by itself. So, without further adieu.....
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
Sponsored Links | |
![]() |
|
Goosic ![]() Senior Member ![]() ![]() Joined: September 12 2017 Location: Phoenix Arizona Status: Offline Points: 6694 |
![]() ![]() ![]() ![]() ![]() |
.
|
|
![]() |
|
303 Hunter ![]() Senior Member ![]() ![]() Joined: December 14 2019 Location: Alberta, Canada Status: Offline Points: 308 |
![]() ![]() ![]() ![]() ![]() |
Nice looking rifle. I always enjoy see your builds.
I noticed that you modified a modern front sight blade. What tools did you use to do that? |
|
The Lee Enfield is to the Canadian north what the Winchester repeater was to the American west. Cal Bablitz
|
|
![]() |
|
Goosic ![]() Senior Member ![]() ![]() Joined: September 12 2017 Location: Phoenix Arizona Status: Offline Points: 6694 |
![]() ![]() ![]() ![]() ![]() |
Thank you for the compliment.
The front sight blade is a Gold Bead LE3/28 from Lyman.
|
|
![]() |
|
FlyPiper907 ![]() Senior Member ![]() Joined: January 31 2021 Location: Alaska Status: Offline Points: 168 |
![]() ![]() ![]() ![]() ![]() |
Wow, amazing. I hope I can attain this skill one day. Excellent job, Goosic. Thank you for sharing.
|
|
![]() |
|
Honkytonk ![]() Senior Member ![]() ![]() Joined: December 30 2017 Location: Brandon Mb Status: Offline Points: 4009 |
![]() ![]() ![]() ![]() ![]() |
Very, very nice.
|
|
![]() |
|
A square 10 ![]() Special Member ![]() Donating Member Joined: December 12 2006 Location: MN , USA Status: Offline Points: 12734 |
![]() ![]() ![]() ![]() ![]() |
looks great
|
|
![]() |
|
Goosic ![]() Senior Member ![]() ![]() Joined: September 12 2017 Location: Phoenix Arizona Status: Offline Points: 6694 |
![]() ![]() ![]() ![]() ![]() |
I had to go back to the smaller 3-9×32 scope. I could not get the one pictured to focus properly and it would not keep a horizontal hold. I just went back to what I know works and left it alone...
|
|
![]() |
|
Zed ![]() Special Member ![]() ![]() Donating Member Joined: May 01 2012 Location: France Status: Online Points: 4898 |
![]() ![]() ![]() ![]() ![]() |
Nice job Goosic!
looking forward to the range report.
|
|
It's nice to be important, but it's more important to be nice!
|
|
![]() |
|
scottz63 ![]() Senior Member ![]() ![]() Joined: November 08 2021 Location: Mid Mo Status: Offline Points: 167 |
![]() ![]() ![]() ![]() ![]() |
Very nice clean buils!
|
|
14EH AIT Instructor-PATRIOT Fire Control Enhanced Operator/Maintainer
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |