Print Page | Close Window

Custom No.4 front sight base

Printed From: Enfield-Rifles.com
Category: Stuff for Enfields
Forum Name: Wanted Items *Must Have 20 Points to Post.
Forum Description: Place requests for items people may have that you need!! ALL APPLICABLE FEDERAL, STATE & LOCAL LAWS MUST BE FOLLOWED!
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=10445
Printed Date: March 26 2026 at 8:17pm
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Custom No.4 front sight base
Posted By: 303 Hunter
Subject: Custom No.4 front sight base
Date Posted: March 27 2020 at 12:28pm
Same request as my other one under a different title.
I’m wondering if there is some one who can either make a couple of foresight bases that will take 3/8th dove tail posts for a couple of Lee Enfield No.4 rifles, or modify a few existing one to do so?

-------------
The Lee Enfield is to the Canadian north what the Winchester repeater was to the American west.   Cal Bablitz



Replies:
Posted By: Goosic
Date Posted: March 27 2020 at 1:10pm
Are you having an issue locating original front sights? May I ask your intentions with a 3/8 dovetail base?


Posted By: 303 Hunter
Date Posted: March 27 2020 at 4:37pm
The main reason is that I want a sight post that has a fibre optic bead on it (Black sights on a black silhouette of a deer is not good for low light hunting conditions). And for the slightly easier time finding the right hight.

-------------
The Lee Enfield is to the Canadian north what the Winchester repeater was to the American west.   Cal Bablitz


Posted By: Goosic
Date Posted: March 27 2020 at 4:53pm
What about an ivory bead front sight?


Posted By: Honkytonk
Date Posted: March 27 2020 at 5:09pm
I always dab a bit of "whiteout" on the front site. Has worked well for me!


Posted By: A square 10
Date Posted: March 27 2020 at 5:40pm
thats an interesting idea , ive always done as honkytonk has , looks a tad bit sharper to me , 


Posted By: 303 Hunter
Date Posted: March 27 2020 at 8:31pm
An ivory bead sight might work. I was thinking fiber optic because my bow as them and most of my hunting is done in the evening so I often have shooting opportunities in low light and I see the pins on the bow better because of them. I painted the back of the front post on my ross for this last season and it help a little bit but I think fiber optic would be better.

-------------
The Lee Enfield is to the Canadian north what the Winchester repeater was to the American west.   Cal Bablitz


Posted By: Goosic
Date Posted: March 27 2020 at 8:50pm
I will try to come up with something in the next couple of days 



Posted By: Shamu
Date Posted: March 28 2020 at 8:08am
I'm still thinking of one for a No1 MkIII!
I want to put a hooded target type front sight on so it matches with the No9 rear sight but the original is angled & the dovetail is the opposite .
These are No4 sight blocks but you get the idea.



-------------
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)


Posted By: Shamu
Date Posted: March 28 2020 at 8:10am
This is the angled one for the No1 rifles.



-------------
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)


Posted By: 303 Hunter
Date Posted: March 28 2020 at 11:09am
Yes, something like that. The only catch would be that I would like to be able to mould the foresight protector.

-------------
The Lee Enfield is to the Canadian north what the Winchester repeater was to the American west.   Cal Bablitz



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net