No5Mk1 handloads
Printed From: Enfield-Rifles.com
Category: Enfields
Forum Name: Hunting with the .303 British cartridge.
Forum Description: Share your hunting stories with the rest of us.
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=11755
Printed Date: March 26 2026 at 6:30pm
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: No5Mk1 handloads
Posted By: 303carbine
Subject: No5Mk1 handloads
Date Posted: December 03 2021 at 1:50pm
|
I loaded some Speer 180 grain RN bullets today and tested them, I shot a 1.25 inch group at 75 yds. The fore end of the wood with the metal end cap was pushing up on the barrel quite hard, I relieved the pressure and free floated the barrel. The 180 Speer shot better than the 150 Hornady, I have a few days of deer season left, this will be the load I use.
|
Replies:
Posted By: Shamu
Date Posted: December 03 2021 at 4:19pm
|
There is supposed to be a mild (5~7Lbs) at the tip bearing. The good news being you can always add an oiled cardboard shim if needed.  Of course if its working for you don't mess with it. ------------- Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force) |
Posted By: Dragunov
Date Posted: December 03 2021 at 4:38pm
303carbine, please tell us about your load, as inquiring minds need to know. 
|
Posted By: 303carbine
Date Posted: December 03 2021 at 9:53pm
I used 47 grains of H4350 under the 180 grain Speer, this is one grain below the max on the Hodgdon reloading site, use with caution as usual.
|
Dragunov wrote: