Print Page | Close Window

Criterion Barrel for No. 4

Printed From: Enfield-Rifles.com
Category: Enfields
Forum Name: Enfield Gunsmithing
Forum Description: Submit any how-to's or other gunsmithing suggestions here.
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=13102
Printed Date: March 26 2026 at 8:19pm
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Criterion Barrel for No. 4
Posted By: britrifles
Subject: Criterion Barrel for No. 4
Date Posted: January 10 2024 at 11:33am
I just submitted a question to Criterion a few minutes ago and already got a response.  They have another batch of No. 4 barrels in work and are expecting them to be ready to ship later this spring.  The website currently shows "unavailable" but if you sign up for the restock notification, you will be notified of the status. 

I plan to order a few more; I don't want to get caught without having a few spare barrels on hand.  





Replies:
Posted By: DarioPirovano
Date Posted: January 10 2024 at 3:32pm
I’m curious to see if there is any difference between the one you mounted last week and those


Posted By: britrifles
Date Posted: January 10 2024 at 4:20pm
I doubt it. 

Next time I do this, I’m going to be very careful with how I finish ream the chamber. These are supposed to be short chambered by 0.01 inches and I’m not convinced the chamber needs any reaming at all. My reamer lengthened the throat considerably and may have taken away significant barrel life.  Using a Hornady OAL gage, the throat seemed just fine the way it came from Criterion. I’m going to ask them about this.  I might get a custom reamer made if necessary. 






Posted By: SW28fan
Date Posted: January 10 2024 at 8:35pm
I am waiting for my M1917 Barrel from them. Should be soon

-------------
Have a Nice Day
If already having a nice day please disregard


Posted By: mattri
Date Posted: May 08 2024 at 4:47pm
Sorry for the dumb question but do these new barrels have provisions for iron sights?  


Posted By: britrifles
Date Posted: May 08 2024 at 4:58pm
Yes, the foresight block band lugs are machined into the barrel, but you have to file a groove into the top of the barrel to install the tapered pin that secures the band to the barrel.  Quite easy to do. I posted details of how I did it on this Forum. 



Posted By: mattri
Date Posted: May 08 2024 at 6:32pm
Thanks I'll see if I can find it👍


Posted By: britrifles
Date Posted: May 09 2024 at 4:05am
Thread is titled “Long Branch 69L Mk 1/3 gets a new barrel”





Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net