Print Page | Close Window

Heavy slugs for 303

Printed From: Enfield-Rifles.com
Category: Reloading
Forum Name: Reloading .303 British
Forum Description: Enfield-Rifles.com accepts NO responsibility for any loads that may be used by persons reading this forum. USE CAUTION WHEN TRYING ANY NEW LOADS!!! ANY DATA DEEMED UNSAFE WILL BE REMOVED!!!
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=13593
Printed Date: March 26 2026 at 6:21pm
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com


Topic: Heavy slugs for 303
Posted By: 303carbine
Subject: Heavy slugs for 303
Date Posted: October 17 2024 at 12:52pm
I  recently picked up some 215 grain Kling Kore Soft Points for my No5Mk1, I got some data from 303British.com.
Back in the early 80's I shot a big bull moose with a No5Mk1a couple of these big slugs.
It was under 100 yds, I put two slugs into the moose, two double lung shots.
The first was a  kill shot, the second was to make sure he didn't run off.




Replies:
Posted By: A square 10
Date Posted: October 17 2024 at 2:57pm
sounds like a deer killer here , we have a lot of brush in our deer hunting areas so carbines are the preferred item , most are using the trusty old 3030 in those areas and there are a lot of them coming to the range these days durringsight in - pre opener 


Posted By: Shamu
Date Posted: October 17 2024 at 6:22pm
I just gave away a couple of boxes of heavy bullets some 215 Gr SP & some 215 Gr FMJ Rebated BTs.
I tried them but they really weren't doing anything for me.
Maybe the new owner will find a home for them in the old Martini actions he likesBig smile


-------------
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)


Posted By: 303carbine
Date Posted: October 23 2024 at 3:29pm
Originally posted by A square 10 A square 10 wrote:

sounds like a deer killer here , we have a lot of brush in our deer hunting areas so carbines are the preferred item , most are using the trusty old 3030 in those areas and there are a lot of them coming to the range these days durringsight in - pre opener 

I shot these on paper today, 1.25 inches at 50 yds, through the factory battle sights. 
No chrony today, next trip.  
They should clock in around 2000 fps??
I wanted to make sure the loads  were safe.


Posted By: Shamu
Date Posted: October 23 2024 at 6:31pm
That's fine for a No5.


-------------
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)


Posted By: 303carbine
Date Posted: October 24 2024 at 10:10am
Originally posted by Shamu Shamu wrote:

That's fine for a No5.

I also tried some 220 grain  .308 diameter Hornady RN out of the No5, they shoot a bit lower on the target  without  tumbling.
The 150, and 180  grain Speer shot good with the 150 grain bullets clocking in at just a hair under 2400 fps with the short barrel of the No5.
I have room to add a couple grains to each load, but with it being accurate I don't feel the need to possibly change the accuracy.


Posted By: Shamu
Date Posted: October 24 2024 at 10:11am
Good decision IMO. The most accurate loads are frequently a little bellow max.


-------------
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)


Posted By: hoadie
Date Posted: October 24 2024 at 1:33pm
215 gr??? on a deer??? Your gonna hafta lick the bullet after you shoot it if'n you want any meat!!

-------------
Loose wimmen tightened here


Posted By: Shamu
Date Posted: October 24 2024 at 2:45pm
BWHAHAHAhahaha!

-------------
Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force)


Posted By: paddyofurniture
Date Posted: October 24 2024 at 2:55pm
You will not have to gut it / field dress it.

All the innards will be going out the exit hole.



-------------
Always looking for military manuals, Dodge M37 items,books on Berlin Germany, old atlases ( before 1946) , military maps of Scotland. English and Canadian gun parts.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.07 - https://www.webwizforums.com
Copyright ©2001-2024 Web Wiz Ltd. - https://www.webwiz.net