Print Page | Close Window

The .303 British

Printed From: Enfield-Rifles.com
Category: Enfields
Forum Name: Enfield Rifles
Forum Description: Anything that has to do with the great Enfield rifles!
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=2035
Printed Date: March 28 2024 at 5:42am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: The .303 British
Posted By: Cookie Monster
Subject: The .303 British
Date Posted: June 15 2008 at 11:41am

The .303 British

By Chuck Hawks


.303%20British
Illustration courtesy of Hornady Mfg. Co.

The rimmed, gentle bottleneck case shape of the .303 British cartridge shows its age, as it was intended for use with black powder and Cordite smokeless powder, but the .303 served the British Commonwealth well through two world wars. And it remains a popular, capable, world-wide hunting cartridge.

Typical .303 British factory loads in the U.S. offer a 150 grain spitzer bullet at a muzzle velocity (MV) of 2,685-2,723 fps and muzzle energy (ME) of 2,401-2,470 ft. lbs. For large game there is a 180 grain RN bullet at a MV of 2,460-2,590 fps and a ME of 2,418-2,680 ft. lbs.

Hornady offers a Light Magnum .303 load with a 150 grain Spire Point bullet at a MV of 2830 fps with ME of 2667 ft. lbs. At 200 yards the figures are 2325 fps and 1800 ft. lbs. This load makes the .303 the ballistic equal of the .308 Winchester with the same weight bullet, and a 275 yard antelope, deer, sheep, and goat cartridge.

A reloader can do quite well with a sturdy .303 rifle. Bullets from 123 to 215 grains are available, with the 150, 174, and 180 grain weights being the most popular for big game hunting. I always favored the 150 grain bullet for hunting CXP2 class game when I owned a .303 rifle.

Given the British cartridge's capacity and pressure limit, medium burning powders such as H335, H414, IMR 4895, IMR 4320, RL-15, and W760 are appropriate.

Because of the rear locking Lee-Enfield (SMLE) bolt action of most .303 British rifles, which allows more case stretch than front locking actions, it is a good idea to just neck size .303 brass. This will extend the case life considerably, a point that is emphasized in the sixth edition of the Hornady Handbook of Cartridge Reloading.

Here are some .303 British specifications of interest to reloaders: bullet diameter .311-.312", maximum COL 3.075", maximum case length 2.222", SAAMI MAP 45,000 cup.

The sixth edition of the Hornady Handbook of Cartridge Reloading shows that 35.3 grains of RL-15 powder will drive their 150 grain spire point bullet at a MV of 2200 fps. A maximum charge of 43.9 grains of RL-15 powder will drive the same bullet to a MV of 2700 fps.

For use on heavier game, the Hornady Handbook shows that their 174 grain bullets can be driven to a MV of 2000 fps by 33.3 grains of RL-15, and to a MV of 2400 fps by a maximum charge of 40.0 grains of RL-15. These loads were developed in the 25.25" barrel of an Enfield #4 Mark 2 rifle, and used Hornady brass and Winchester WLR primers.




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net