MkV Butt needed
Printed From: Enfield-Rifles.com
Category: Stuff for Enfields
Forum Name: Enfield Stuff for Sale *Must Have 20 Points to Post.
Forum Description: IF YOUR ITEM IS LISTED ON MORE THAN THIS SITE THE POST MUST STATE THIS FACT. ALL APPLICABLE FEDERAL, STATE & LOCAL LAWS MUST BE FOLLOWED!
URL: http://www.enfield-rifles.com/forum_posts.asp?TID=9619
Printed Date: March 26 2026 at 8:17pm
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: MkV Butt needed
Posted By: Black Prince
Subject: MkV Butt needed
Date Posted: March 11 2019 at 10:54pm
|
Hi Am in need of a MkV jungle carbine butt. Am not sure of wood but it looks like it needs to be Wallnut I think. Will put pic in of forend and top soon for verification.  ------------- I know what I like & like what I know. |
Replies:
Posted By: Goosic
Date Posted: March 12 2019 at 2:30pm
| Welcome to the forum. I am going to assume from your photo that you require a butt stock for a No5 Mk1 Enfield. The MkV Enfield is a rare beast but a butt stock can be found for it. The No5Mk1 butt stock can be found on eBay, Numrich Gun Parts, Sarco,and DixieGunWorks. |
Posted By: A square 10
Date Posted: March 12 2019 at 5:54pm
|
gonna play tony here - this is a perfect example of needing the correct nomenclature as these two rifles are very different items and the part you desire is totally different on each , the no 1 mk V buttstock is the traditional no 1 without the disc and should be findable on the market , the no 5 mk I buttstock has a very unique sling swivel and it has a cushioned plate assembly that is hard to find intact original but has been reproduced well , cannot be certain from your photo but i think you are showing walnut also guessing but the forestock appears to be a no 5 needing the end cap , but the photo is not confirming that - im also guessing thats the only handguard as a no 5 would have
|
Posted By: Black Prince
Date Posted: March 12 2019 at 9:45pm
|
G'Day The fore stock's end cap is removed to help the cleaning process. Yep some had caps and some not. Mine has an Queensland maple butt (very light colour,yellowish) I'd like to get a walnut butt to match the rest, all the numbers match, bolt, magazine, barrel etc, I think it was refurbished in Australia. But could be wrong. It is apart at the moment getting a good clean up,as it sat in a cabinet for a long time neglected before I purchased it, bore is 8,9/10. I will put pic on post soon. you can see the differences below.. These pics are from an Aussie site and are for sale top one $1,300 (Aust $) bottom one is an experimental model with long bayonet at $10,000 + (Aust $).  Bottom one is a BSA,with front swivel on the side? (the white bits front and rear is clear plastic gun stand). Look up the site usedguns.com.au.    ------------- I know what I like & like what I know. |
Posted By: Black Prince
Date Posted: March 12 2019 at 9:49pm
Thanks for the welcome. Yep I looked up Numrich, but they say no to international sales! I'll check the other two out. ------------- I know what I like & like what I know. |
Posted By: Black Prince
Date Posted: March 13 2019 at 12:58am
|
Pic of butt it's not the original one. I hope this comes out! IMG_5646.jpg ------------- I know what I like & like what I know. |
Posted By: Black Prince
Date Posted: March 13 2019 at 1:04am
|
Hi there this is the butt not Walnut but Queensland maple or so????? I need a Walnut to replace will swap if needed. Cheers. 
------------- I know what I like & like what I know. |
Posted By: Shamu
Date Posted: March 13 2019 at 5:49am
|
First try at posting a pic comes up as a broken link only. ------------- Don't shoot till you see the whites of their thighs. (Unofficial motto of the Royal Air Force) |
Posted By: A square 10
Date Posted: March 13 2019 at 5:27pm
| i want that experimental mkVI thats a really rare one - if its real its worth that number , |
Posted By: Black Prince
Date Posted: May 13 2019 at 3:44am
|
Hi guy's sorry for late report. But importing wood of any type into Australia is a big issue. All imported wood is radiated by customs at a price of about $ 200 per piece to kill any bugs etc that could be in the wood if you don't pay it's destroyed. So I will have to keep my eyes open for some thing in Australia. Bummer big time. ------------- I know what I like & like what I know. |
Posted By: saltydog73
Date Posted: December 17 2019 at 8:10am
| If you have not found your butt and are considering giving up on the project, I'd gladly negotiate a fair price for your forend and forestock. |